- (321) 398-1343
- javier@djepoxysolutions.com
Patio and lanai floor coating in Palm Bay, FL can turn bare, stained, or worn outdoor concrete into a cleaner finished surface selected for the way your outdoor space is exposed and used.
DJ Epoxy Solutions coats screened lanais, covered patios, back porches, terraces, and suitable open concrete areas throughout Palm Bay and nearby communities.
Outdoor floors do not all face the same conditions.
A screened lanai may get wind-blown rain.
A covered patio can still get afternoon sun.
An open patio deals with direct weather.
That is why DJ Epoxy Solutions looks at the concrete, exposure, drainage, and how the space is used before recommending a coating system.
How much weather reaches the floor can change what the project needs.
Tell us about your space and get a personalized floor coating estimate from our team
(321) 398-1343
A screen enclosure offers some protection, but the floor still lives outdoors.
Rain can blow through the screens. Humidity is still present. Sunlight can reach parts of the floor during the day.
DJ Epoxy Solutions checks these conditions before recommending the finish.
A roof can protect much of the patio, but open sides can still allow rain, moisture, and sunlight to reach the concrete.
Areas near the edge may age differently from areas closer to the house.
The full patio should be looked at before coating begins.
Open patios have the most direct exposure to Florida weather.
Sun, rain, outdoor furniture, dirt, and normal backyard use all affect the surface.
DJ Epoxy Solutions can inspect the slab and explain which available system makes sense for the space.
A patio or lanai may be one of the most used parts of a Florida home.
It may be where you:
But bare or worn concrete can make the space feel unfinished.
A floor coating can improve the appearance of the concrete and give the patio or lanai a more complete look.
It can also make regular cleaning easier than dealing with rough, unfinished concrete.
The existing slab matters.
Bare concrete can be a good starting point, but it should still be checked for cracks, pits, stains, repairs, and other visible issues.
Paint may be peeling, worn, or poorly bonded to the concrete. The existing material needs to be evaluated before another system is installed.
An older coating may need additional surface preparation or removal. DJ Epoxy Solutions does not assume a new coating should simply go over whatever is already there.
Visible damage is checked before installation. Some repairs may fit within the flooring work. Larger problems may need to be handled separately.
Years of outdoor use can leave concrete looking tired even if the slab is still usable. A coating may be a good option after the surface is properly prepared.
Not Sure What Your Floor Needs?
DJ Epoxy Solutions currently offers two confirmed systems that can work on suitable patios and lanais.
Tell us about your space and get a personalized floor coating estimate from our team
(321) 398-1343
Flake systems add color and visual variation across the floor.
They can work well for:
Available Flake blends include options such as:
Additional blends are available.
DJ Epoxy Solutions confirms Flake as an option for patios, lanais, back porches, and terraces when the system is appropriate for the conditions.
Quartz is another option for suitable outdoor concrete.
It creates a more textured finish and may make sense for projects where additional surface texture is important.
Available Quartz colors include:
DJ Epoxy Solutions confirms Quartz as an available system for patios and lanais, depending on the selected products and project conditions.
Metallic floors can create a decorative marble-style appearance, but DJ Epoxy Solutions currently uses Metallic / Marble-Look systems for interior applications only.
For patios and lanais, Flake or Quartz are the current exterior options confirmed by DJ Epoxy Solutions.
If you want a decorative look outdoors, Javier can help you compare the available colors and finishes.
A screen enclosure changes the exposure, but it does not turn a lanai into an indoor room.
A screened floor may still deal with:
That is why DJ Epoxy Solutions treats a screened lanai as an outdoor flooring project.
The floor system should match the actual conditions around the slab.
Two patios on the same street can have very different exposure.
One may stay mostly dry.
Another may get afternoon rain from the side.
A lanai may stay dry in the center but regularly get wet near the screen wall.
Tell DJ Epoxy Solutions:
These details help Javier understand the project before a system is selected.
Standing water is something we want to know about before coating begins.
If water regularly stays in the same spot, it may point to:
A coating changes the finish of the concrete.
It does not reshape the slab or automatically correct drainage.
If the floor has a water problem, it is better to identify it before coating the surface.
Outdoor concrete may already have several years of material on top of it.
Before a new coating is installed, DJ Epoxy Solutions checks what is already there.
The surface may have:
Loose or failing material may need additional preparation.
This is why seeing the concrete in person is important.
The exact work depends on the slab.
DJ Epoxy Solutions looks at the floor, exposure, existing finish, and how the area is used.
Cracks, pits, repairs, and previous materials are reviewed.
Mechanical preparation is completed when needed. Diamond grinding is an important part of the DJ Epoxy Solutions process when appropriate.
Repairs are completed based on the condition of the slab and the flooring scope.
The floor is cleaned before the selected system is installed.
The project may use Flake or Quartz depending on the space and finish selected.
The final finish depends on the selected system.
The surface needs time before walking and heavier use return.
DJ Epoxy Solutions reviews the completed floor before the project is turned back over to the homeowner.
The owners of DJ Epoxy Solutions specifically instruct that coating layers, chemicals, thicknesses, and technical details should not be invented when they have not been confirmed for the selected system.
DJ Epoxy Solutions publishes starting prices so homeowners have a better idea of the expected budget.
Starting at $2,000
Starting at $6 per sq. ft.
Starting at $15 per sq. ft.
These are starting prices.
Your final estimate can change based on:
These starting prices are approved by the owners of DJ Epoxy Solutions for public use.
Patios and lanais often hold more than chairs.
You may have:
DJ Epoxy Solutions generally recommends:
Walking: about 8 hours
Heavy use: about 72 hours
The exact instructions can change based on the project.
Ask Javier before returning heavy furniture, large planters, or grills to the finished floor.
Patios and lanais are exterior projects.
That means weather matters.
Rain can affect the schedule.
The condition of the surface can affect when preparation begins.
An open patio may have different conditions from a screened lanai only a few miles away.
DJ Epoxy Solutions confirms that exterior project schedules can be affected by weather.
If conditions are not right for the project, the schedule may need to move.
We would rather plan around the weather than pretend an exterior floor is the same as an indoor room.
Patios and lanais are exterior surfaces.
DJ Epoxy Solutions currently provides a 5-year warranty on exterior work, subject to the terms of the written estimate and contract.
The warranty mainly applies to issues connected to the installation performed by DJ Epoxy Solutions.
It does not mean the floor cannot be damaged or that every type of damage is covered.
The project-specific terms are provided in writing.
These outdoor areas can connect to each other, but they do not always have the same use.
This page is for:
The concrete immediately around a pool has its own concerns, including regular pool splash and wet barefoot traffic.
If your project includes the pool surround, DJ Epoxy Solutions can evaluate the connected spaces together.
A coating on an existing slab is different from building a new patio or changing a structure.
If your project also includes:
The permit requirements for the full project should be confirmed with the City of Palm Bay.
DJ Epoxy Solutions can evaluate the flooring portion without telling homeowners that every coating project is automatically permit-exempt.
Some Palm Bay communities have rules for visible exterior changes.
If your patio or lanai is part of a condo, townhome, or HOA community, check whether your association has rules for:
Not every association has the same rules.
If approval is required, it is easier to know before the final color is selected.
Javier is the main face of DJ Epoxy Solutions.
He participates in:
Javier also has more than 30 years of construction experience.
That is construction experience, not a claim of 30+ years installing epoxy.
That background can be useful when an outdoor floor has old repairs, drainage concerns, or concrete conditions that need to be looked at before coating.
DJ Epoxy Solutions is based at:
2475 Palm Bay Road NE, Suite 115-5
Palm Bay, FL 32905
DJ Epoxy Solutions serves homeowners throughout Palm Bay and nearby communities.
Approved service areas include:
The service-area information supplied by the owners also includes Sebastian, Vero Beach, Rockledge, Cocoa Beach, Merritt Island, and other approved communities
Within Palm Bay, DJ Epoxy Solutions can work with homeowners around areas such as Bayside Lakes, Bermuda Walk, Bimini Bay, and other residential parts of the city.
A typical 200–400 sq. ft. Flake patio or lanai starts around $2,000, and Flake systems start at $6 per square foot. Quartz starts at $15 per square foot, while your exact price depends on the concrete and preparation needed.
Yes. DJ Epoxy Solutions can evaluate screened lanais and other suitable outdoor concrete spaces. The amount of sun, rain, and moisture exposure helps Javier decide what system fits the floor.
Yes, suitable open patio concrete can be coated. Because the floor is fully exposed to Florida weather, the condition of the slab and the installation schedule matter more.
Both can work on suitable patios and lanais. Flake gives more decorative color variation, while Quartz provides a more textured finish; Javier can help you choose after seeing the floor.
DJ Epoxy Solutions does not recommend Metallic epoxy for exterior lanais or patios. Metallic is an interior-only system in the current DJ Epoxy Solutions service lineup.
Sometimes, but the existing paint or coating needs to be checked first. Loose or failing material may need to be removed before the new system is installed.
DJ Epoxy Solutions checks cracks, pits, and visible damage before coating. Small repairs may fit within the flooring project, while larger structural problems need to be identified separately.
Tell Javier where water collects and how long it stays there. A coating changes the finish of the concrete, but it does not automatically correct low spots, slope, or drainage.
Installation time depends on the size of the area, slab condition, repairs, and the system selected. Outdoor weather can also change the schedule.
DJ Epoxy Solutions generally recommends about 8 hours before walking on a completed exterior project. Javier will give you the instructions for your specific floor.
DJ Epoxy Solutions generally recommends about 72 hours before heavy use. Ask Javier about grills, large planters, or heavy furniture before moving them back.
Yes. Patio and lanai coatings are exterior projects, so rain and surface conditions can change the installation schedule. DJ Epoxy Solutions may move the job rather than work in conditions that are not right for the floor.
DJ Epoxy Solutions provides a 5-year warranty on exterior surfaces, subject to the written estimate and warranty terms. It mainly covers installation-related issues and does not mean every type of damage is covered.
A coating on an existing slab is different from building a new patio or making structural changes. If the project includes new concrete, structural repair, drainage work, or changes to a screen enclosure, confirm the requirements with the City of Palm Bay.
Yes. DJ Epoxy Solutions can evaluate connected outdoor areas together. The immediate pool surround is handled under the Pool Deck Coating service so the use of each surface can be considered correctly.
Yes. DJ Epoxy Solutions serves approved areas throughout Brevard and Indian River counties, including Melbourne, West Melbourne, Malabar, and Grant-Valkaria.
You do not need to know whether Flake or Quartz is right before contacting DJ Epoxy Solutions.
Start with the space.
Tell us whether it is screened, covered, or open.
DJ Epoxy Solutions can look at the concrete, review how rain and sun reach the floor, check old coatings and damage, and help you choose a system that fits the project.
Or speak directly with Javier:
321-398-1343
DJ Epoxy Solutions
2475 Palm Bay Road NE, Suite 115-5
Palm Bay, FL 32905
Visit Our Company
2475 Palm Bay Rd NE Ste 115-5, Palm Bay, FL 32905
(321) 398-1343
Lifetime warranty on interior floors.
5-year warranty on exterior surfaces.
Mon – Sun
08:00Am – 07:00Pm
2475 Palm Bay Rd NE Ste 115-5, Palm Bay, FL 32905
Email Address :
javier@djepoxysolutions.com
(321) 398-1343
Serving Brevard & Indian River Counties: Palm Bay • Melbourne • West Melbourne • Melbourne Beach • Indialantic • Satellite Beach • Indian Harbour Beach • Viera • Rockledge • Cocoa • Cocoa Beach • Merritt Island • Malabar • Grant-Valkaria • Micco • Sebastian • Fellsmere • Wabasso • Vero Beach